Get a quoteRequest a demonstration

Support

METClean DPF cleaning machine video guides

Find the METClean video guide for your machine. See how to connect a DPF, run the wash and use the drying controls. There are separate guides for the analogue controls, the touchscreen and routine filter and water changes. Use the videos alongside the operating instructions for your model and revision.

Operating your machine

  • METClean XL Multi+ operating guide

    Video · 1 min 55 s

    See how the pneumatic door, pre-test and automatic cleaning programme fit into a heavy-duty DPF job.

    Open the XL Multi+ operating guide
  • METClean S operating guide

    Video · 1 min 46 s

    Follow the touchscreen workflow from clamping the DPF and filling in the ticket to Pre Test, Auto Clean and Hot Dry.

    Open the S operating guide
  • METClean E operating guide

    Video · 1 min 40 s

    See how to connect and strap down the DPF, set the wash on the analogue controls and finish with a cold-air purge.

    Open the E operating guide
  • METClean V operating guide

    Video · 1 min 34 s

    See how to use the wash timer and water-flow dial on the van-mounted cabinet.

    Open the V operating guide

Controls and routine maintenance

  • METClean E control panel

    Video · 1 min 28 s

    Read the red and green displays and find the heater, timer and drying controls on the panel shown.

    Open the E control panel guide
  • DPF cleaning machine controls

    Video · 5 min 30 s

    Find your way around wash and drying settings, customer ticket details, alerts, pre-test functions and the cleaning countdown. The film describes the S, XL and XL Multi+ screens, with the XL-only door controls identified separately.

    Watch the control-screen guide
  • DPF counters and Auto Clean countdown

    Video · 41 s

    Find out what the two counts mean, how to reset SINCE FILTER and where to see the time remaining.

    Watch the counter and countdown guide
  • Filter and water changes

    Video · 1 min 35 s

    Find the filter, tank and refill procedures for your machine.

    Open the filter and water change guide

Engineer reference

  • Serial-number setup and pressure calibration

    Video · 1 min 11 s

    A reference for engineer setup and test-pressure calibration. Serial-number setup requires the MET engineer login. Contact technical support before changing these settings.

    View the engineer reference

Use the guides alongside your machine instructions

These videos support the operating instructions and training for your machine. For maintenance procedures, use the relevant manual and maintenance guide. If you need help, contact MET with the machine details and a photograph of the screen.

Sales and support telephone
01934 644427
Sales and support email
Contact@mobileecotuning.com
WhatsApp for photos and video
+44 1934 910715
Support hours
Monday to Friday, 9am to 5pm

Choosing a DPF cleaning machine?

Explore the METClean range, compare the models or ask for a demonstration of the machine that suits your work.