Get a quoteRequest a demonstration

Operating guide

How to use the METClean S

On the METClean S, connect and clamp the DPF before using the touchscreen to record the job, run the pre-test and start the wash. The film shows the S touchscreen with Ticket Configuration. Check the operating instructions for your machine and software revision.

Before you start

For trained operators of the METClean S touchscreen. You need the power and compressed air connected, the tank full and the machine on level ground, with gloves and safety glasses. If your screen looks different, send MET your model, serial number and a photo of the controls.

Watch the METClean S operating film

METClean S · MET on YouTube · 8 November 2026 · 1 min 46 s

MET’s walkthrough of a DPF job on the S touchscreen: connecting and clamping the filter, the job ticket, the pre-test and its result, Auto Clean, changing to the drying hose and Hot Dry.

Nothing loads from YouTube until you press Play; the film then plays in YouTube’s privacy-enhanced mode, and YouTube may store cookies (cookie policy). Watch on YouTube

  1. 0:00 Set up the machine
  2. 0:13 Prepare and connect the DPF
  3. 0:28 Clamp the DPF
  4. 0:35 Fill in the ticket
  5. 0:43 Run the pre-test
  6. 0:52 Read the result
  7. 0:59 Start Auto Clean
  8. 1:08 Change hoses and use Hot Dry
  9. 1:32 Service intervals

Written guide

How do you connect the DPF and fill in the ticket?

Check the direction of exhaust flow and fit the adaptor to the outlet. Connect the braided wash hose and use the clamping ram to secure the filter as shown in your instructions, then close and secure the door before testing. On the touchscreen shown, open Ticket Configuration and enter the operator and customer details for the job.

Written guide

When do you run Pre Test on the METClean S?

Run Pre Test before washing the DPF so the reading records how the filter arrived. Use the test result alongside the inspection findings and record it with the job. The pre-clean inspection reporting guide explains what the result tells you and how it is recorded.

Written guide

How do Auto Clean and Hot Dry work?

Auto Clean runs the prewash, main wash and high-pressure impact stages. When the wash is complete, follow the manual to switch to the separate drying hose before running Hot Dry. Some DPF/CAT combinations retain water. Follow the drying and refitting instructions for the component and ask MET for the correct procedure if it still holds water.

Operating instructions

How to use the METClean S

MET’s step-by-step operating guide for the METClean S touchscreen: connecting and clamping a DPF, the job ticket and pre-test, Auto Clean and Hot Dry, with the screen reference and service intervals.

Download How to use the METClean S (PDF)PDF, 850 KB, 8 pages

Need help with your machine?

For current contact details and help with your machine, visit METClean support. Have your model, serial number and a photo of the controls to hand.